Creating A Raw Wood Look Without Bleach

Okay, so I’ll try to make this short! I purchased a completely different dining room set back in September of last year and when I finally got around to refinishing it (I was busy) it just didn’t work in our space.

Thankfully, I found a new set that fit our space and just needed to be refinished. Here it is with the chairs almost finished and the mahogany table in its original finish:

Dining Set Before

I was planning to leave the table raw and unfinished but once it was sanded down I knew I wouldn’t be able to just seal it & call it a day. The leaf was a different wood with red tones and various discolorations throughout. So, there was no way I could leave it unfinished.

Dining room table

I immediately ruled out actually bleaching the wood because once you do that you forever change the wood and I just wasn’t willing to risk it. I decided to use paint instead to create the raw wood look I was going for, which would tone down the red, conceal any discoloration, and blend the three pieces together. Also, if for some reason I didn’t like it I could easily change it. I chose Sandy Blonde by DIY Paint and simply applied it like a wash. If I applied the paint too thick I’d just dip my brush in water and thin it out enough to reveal the wood grain and not all of the flaws.

Sandy Blonde DIY Paint

After just one coat I had the look I wanted, so I added a top coat that’s no longer being made, but I would highly recommend the Varnish Top Coat (matte finish). We then moved it into our dining space and while I had just successfully created the look I was going for, I didn’t love it. Turns out I’m not as ready as I thought I was for the bleached/raw look. However, if you love this look then you can stop right here…just add a top coat and you’re done! But if you’d like to see what I did next, please continue to read below.

Vintage Dining Room Table and Chairs

I grabbed some Spray Waxes out of my cabinet, which are no longer available. Now, I would substitute those with the Wise Owl Glazes in Black Walnut or Java and Driftwood. I already applied the top coat, so I added Driftwood sparingly with a ClingOn paintbrush. These brushes are used wet/damp and work great with all these products. However, you can also use a sponge to apply glazes.


You can see the difference adding a dark glaze makes. This was much more to my liking. The Driftwood is definitely a blue-gray and I immediately wiped back most of it using a damp sponge. It was a little too dark for my needs but once I applied a brown over it it was perfectly subdued. I really liked the look of it but decided not to add any more of the Driftwood over the top. But, you can see where I used it on the corner edge of the table. *Use a damp sponge to wipe back and/or remove any excess, & blend in the glaze.

You’ll then want to seal your top with 2 final coats of Varnish Top Coat, allowing a few hours of dry time in between coats. This is a water-based top coat that comes in a Matte or Satin finish and absolutely will NOT yellow.


I should mention that for the table skirt and legs I used Faded Burlap, by Debi’s DIY Paint. And here is my finished table, albeit in a more natural color vs my first raw/bleached look but I love it and hope you do, too!

Dining Room Set


Wow – what a brilliant way to harmonize all of the disparate woods. This set is now museum worthy…thank you so much for sharing your secrets! I can think of so many times when this method will come in handy!

So very beautiful! Can’t wait to try some of these products. Thanks for sharing.

Exquisite!! So funny that you’ve just posted this, as I have been fighting a similar situation with a client’s table. Your end- END result is exactly what we are looking for! Thank you so much for sharing!!! You’re a doll and a lifesaver!

Yay! I’m thrilled that my post was able to help you & your client πŸ™‚

Oh, this is gorgeous!! I need to do something to our dining room table (have to convince the hubby first) – but I’m loving this look. I’m assuming you’d need to re-apply the wax occasionally? Can I ask how often? TIA!

Thank you πŸ™‚ Nope, you never need to reapply the spray wax. Also, it’s sealed with a Top Coat.

Wow, what a transformation and the table no longer has that dated finish. The first piece of furniture I ever stripped (at 15 yrs old) I found two different types of wood but since I was staining it I only tried to leave the stain on darker and that didn’t work. But this trick worked great!

Oh my, your table transformed into such a beautiful piece of furniture! It looks like you bought it from Restoration Hardware! I’m going to have to bookmark this post for future reference. Your painting skills are beyond my skills and I will glean information from you! Love this post and project!

Thank you very much πŸ™‚ Anyone can achieve this look as I always look for the easiest way to do things πŸ˜‰

This is FABULOUS! I have never see the spray wax before but I can think of at least 2-3 projects sitting in my garage right now that would totally benefit from this stuff. Awesome job – love the final table color!