Details

APPLICATOR PADS

Our 4″ x 6″ applicator pads come in a pack of 2. These are a great way to apply our Stain and Finishing Oil or our Tough Coat.

*These Applicator pads are a one-time use. 

If you’re looking to apply Tough Coat with a re-useable item, try our Staalmeester Rollers instead. They can be washed and reused again and again.

Beeswax Distressing Block™

Our 100% natural Beeswax Distressing Block™ is the perfect tool to easily distress any project you are working on.

For the exact placement of distressed lines and edges, press the wax block where you would like to see the distressed antiquing effect between layers of paint.

Anything that is applied on top of the waxed areas will easily distress without too much pressure from sanding! You will notice this resistance once you are giving your piece a light sanding at the end of your application of all layers of paint. Any paint underneath the wax will remain in place, and any paint applied on top of the wax will come off effortlessly, allowing for the perfect distressed look.

FRAME & VELOUR ROLLER

Velour rollers are a 3mm pile. They are good for applying multiple thin coats of paint to achieve a sprayed-on-like finish.

SANDING PADS

Sanding Pads offer the same high-quality abrasives as sheets but are often easier to use because they’re easy to hold and have durable foam backing. Our wide variety of grits can help you at any stage of your project – from wet or dry sanding on drywall, to super fine finishing on wood or metal.

TOUGH COAT APPLICATOR SPONGE

These Tough Coat sponges have been made to take the stress away from your top coat step!

Made with an ergonomic grip for your hands, our sponges provide extra stability and ease while applying our Tough Coat.

It is easiest to pour your Tough Coat on a disposable paper plate.  Slightly dampen your sponge with water and dip it evenly in our Tough Coat. Start at one end of your project and do a solid swipe in one direction. Repeat this process over your entire piece.  Ensuring you always wipe your sponge in one direction only. Do not wipe backward over the wet Tough Coat surface. Wiping backward will cause air bubbles to form in your Tough Coat. To ensure a smooth, streak-free application wipe in one direction.

Let your Tough Coat dry for approximately 2-4 hours and then repeat the process.

When using these sponges, you can keep them in a ziplock bag with the air removed to prevent them from drying between coats.

Clean-up time? Simple.  Use our Brush Cleaner and water to rinse out the residue in your sponge.  Rinse well and let dry.  Keep your sponge for future projects.  You can reuse your sponge approximately 3-5 times.